Back to Blog
Tips & Care 2026-11-16 Decorum Studio Cornwall 2 views

How to Clean and Care for Gloss Arc and Signal Tiles

How to Clean and Care for Gloss Arc and Signal Tiles

A practical guide to cleaning and maintaining gloss Arc and Signal tiles, covering the base tile choice, grout care, and what the catalog does and does not confirm.

Start with the base tile, not the pattern

Arc Peach and Signal Lavender are both 13 x 13cm hand-produced tiles available on three base tiles: English White (a warm off-white gloss), Cornish White (a bright white gloss), and Chalk White (a soft white matt). The care routine you choose should follow the base tile finish, because gloss and matt surfaces respond differently to cleaning. The catalog does not include specific cleaning instructions for either tile, so the guidance below is general best practice for gloss wall tiles, not a manufacturer procedure.

What the catalog confirms about these tiles

  • Arc Peach: Arc Peach is a 13 x 13cm tile, individually hand stencilled to give a more organic texture, available on English White, Cornish White, or Chalk White base tiles. The hand-stencilled surface and base choice determine how gently you should clean and which finish you are maintaining.
    Arc Peach
    Arc Peach
  • Signal Lavender: Signal Lavender is a 13 x 13cm hand-produced tile inspired by nautical shapes, available on English White, Cornish White, or Chalk White base tiles. Hand production means variation is expected; cleaning should preserve the decorative surface rather than scrub it aggressively.
    Signal Lavender
    Signal Lavender

A safe cleaning routine for gloss Arc and Signal tiles

These steps are general guidance for gloss wall tiles. The catalog does not supply a manufacturer-approved cleaning method, so test any product on a spare tile or inconspicuous area first.

  1. Dust and dry-wipe first: Use a soft, dry cloth or duster to remove loose dust and debris. This prevents grit from scratching the gloss surface during washing.
  2. Wash with a mild solution: Wipe with a soft cloth dampened in warm water and a small amount of mild pH-neutral detergent. Avoid abrasive cleaners, scouring pads, or acidic products that can dull gloss or affect grout.
  3. Rinse and dry: Remove detergent residue with a clean damp cloth, then dry with a soft towel to prevent water spots, especially on English White and Cornish White gloss bases.
  4. Treat grout gently: For grout lines, use a soft grout brush with the same mild solution. Rinse well. Avoid harsh bleach or acid-based grout cleaners unless you have confirmed they are suitable for your grout type.
  5. Address stains promptly: Wipe up spills when they occur. For stubborn marks on the hand-stencilled design, dampen the area and use a soft cloth; do not scrub the pattern aggressively.

Base tile finish changes your care approach

  • English White and Cornish White (gloss): These gloss bases show water marks and fingerprints more readily. Dry after cleaning and use a soft cloth to maintain shine. Avoid abrasive pads that can create fine scratches.
  • Chalk White (matt): Matt surfaces can be more forgiving of water spots but may hold onto soap residue. Rinse thoroughly and avoid oily cleaners that could leave a sheen.

What the supplied information does not settle

The catalog does not provide specific care instructions, recommended cleaning products, or sealant guidance for Arc Peach or Signal Lavender. It also does not state whether these tiles are suitable for wet areas such as showers or for floor use. If you need that level of assurance, check with the manufacturer or a tiling professional before installation. Treat the steps above as general gloss wall tile maintenance, not as confirmed product instructions.

Related Articles

Customer Service
Home
Products
Cart
Profile