What Makes the Half Plain Sailing Mushroom Tile Different
The Half Plain Sailing Mushroom tile is a hand-decorated 13 x 13cm wall and ceiling tile from Decorum Studio Cornwall. Each tile is individually finished in the Cornwall studio, giving it a unique character that factory-produced tiles cannot match. The Mushroom shade sits within the Plain Sailing collection, which is designed to let you mix and match colours for stripes, checkerboards, or bold single-colour walls.
Because the tile is hand-decorated, slight variations in colour and finish are part of the appeal. This is not a defect; it is the reason the tile looks like a handmade ceramic piece rather than a mass-produced industrial product.
Key Facts About the Half Plain Sailing Mushroom Tile
- Half Plain Sailing Mushroom: 13 x 13cm tile, hand decorated in Cornwall Studio. The 13cm size is a classic tile format that works on both walls and ceilings. Hand decoration means each tile has subtle variations.

Half Plain Sailing Mushroom - Half Plain Sailing Mushroom: Available in three base tile colours: English White (warm off-white gloss), Cornish White (bright white gloss), and Chalk White (soft white matt). The base colour changes the overall look of the tile. English White gives a warmer tone, Cornish White a crisp bright look, and Chalk White a soft matte finish.
- Half Plain Sailing Mushroom: Works well with Decorum’s Arc and Signal range, and plain tiles to create a pattern of your choice. You are not limited to a single tile. The Mushroom tile can be combined with other Decorum collections for custom patterns.
Choose Your Base Colour First
Before you start installing, decide which base tile colour you want. The Half Plain Sailing Mushroom tile is offered in three base options:
English White – a warm off-white gloss tile that gives the Mushroom colour a slightly cosier feel. Good for bathrooms with warm lighting or wooden accents.
Cornish White – a bright white gloss tile that makes the Mushroom colour pop. Ideal for bathrooms that need a crisp, clean look.
Chalk White – a soft white matt tile that reduces glare and gives a more subdued, modern finish. Works well in bathrooms with natural stone or matte fixtures.
The base colour affects how the Mushroom shade reads on the wall. If you are unsure, order a sample tile first to see it in your bathroom's lighting.
Installation Steps for Walls and Ceilings
These steps are based on general tile installation best practices. The supplied information for this tile does not include specific manufacturer instructions, so follow standard tiling procedures for your substrate.
- Prepare the Surface: Ensure the wall or ceiling is clean, dry, and level. Fill any holes or cracks and apply a suitable primer if needed. For bathrooms, use a waterproof backer board or a properly sealed surface.
- Plan Your Layout: Dry-lay a row of tiles on the floor to check spacing and alignment. Because the tile is 13 x 13cm, it creates a neat grid. Decide if you want a full pattern, a stripe, or a checkerboard. Mark reference lines on the wall.
- Apply Adhesive: Use a thin-set mortar suitable for ceramic tiles. Apply with a notched trowel, holding it at a consistent angle to ensure even coverage. Work in small sections to prevent the adhesive from drying before you place the tiles.
- Place the Tiles: Press each tile firmly into the adhesive, using spacers to maintain even gaps. Check with a level frequently. For ceilings, support the tiles with temporary props or adhesive tape until the mortar sets.
- Grout the Joints: After the adhesive has cured (follow the mortar manufacturer's recommended time), apply grout using a rubber float. Wipe off excess grout with a damp sponge before it hardens. For bathrooms, use a waterproof grout.
- Seal the Tile (Optional): If you chose the Chalk White matt base, consider applying a penetrating sealer to protect the surface from moisture and stains. Gloss finishes are naturally less porous.
Pattern Ideas for Your Bathroom
The Half Plain Sailing Mushroom tile is designed for mixing. Here are a few layout ideas that work well in bathrooms:
Stripes: Alternate rows of Mushroom with a contrasting colour from the Plain Sailing collection, such as a light blue or soft green. This creates a vertical or horizontal stripe effect that can make a small bathroom feel taller or wider.
Checkerboard: Use Mushroom tiles in a checkerboard pattern with a white or cream plain tile. This classic look suits both traditional and modern bathrooms.
Single colour wall: Cover an entire wall with Mushroom tiles for a bold, cohesive statement. This works especially well in a shower niche or behind a vanity.
Accent strip: Use a single row of Mushroom tiles as a border or accent line within a larger field of plain tiles. This adds a subtle pop of colour without overwhelming the space.
What the Supplied Information Does Not Settle
The catalog confirms the tile size (13 x 13cm), the three base colour options, and the hand-decorated nature of the tile. It does not include specific installation instructions, adhesive recommendations, grout type, or curing times. For those details, rely on standard tiling best practices and the manufacturer's guidance for your chosen adhesive and grout.
The tile is described as suitable for walls and ceilings. If you plan to use it in a wet area such as a shower, ensure the substrate and grout are fully waterproof. The catalog does not provide a slip-resistance rating or specific wet-area certification, so treat it as a decorative wall tile rather than a floor tile.


