Arc Lichen Wall Tile: Care and Maintenance Tips
By Decorum Studio Cornwall | Published: 2026-10-27
Category: Tips & Care
Learn how to clean and maintain your Arc Lichen wall tile. This guide covers stain removal, daily care, and when to call a professional.
Quick answer
For daily cleaning of your Arc Lichen wall tile, use a soft cloth and mild soapy water. Avoid abrasive cleaners and scrubbers to protect the hand-stenciled design.
Why gentle cleaning matters for hand-stenciled tiles
Arc Lichen tiles are individually hand stenciled, which gives each tile a unique organic texture. This surface is more delicate than standard glazed tiles, so harsh chemicals or abrasive pads can wear down the stenciled pattern over time.
The tile is available on a choice of three base tiles, and the design shown on English White base. Regardless of the base you choose, the stenciled layer requires the same careful approach.
Daily and weekly care routine
For routine cleaning, wipe the tiles with a soft, damp microfiber cloth and a few drops of mild dish soap. Rinse with clean water and dry with a soft towel to prevent water spots.
Avoid using vinegar, bleach, or ammonia-based cleaners as they can dull the hand-painted finish. Steam cleaners are also not recommended for the same reason.
Diagnosing and fixing common tile issues
- Symptom: Dull or faded stenciled pattern: Likely cause: Using abrasive cleaners, scrub brushes, or harsh chemicals like bleach or vinegar. Corrective action: Switch to a soft cloth and mild soapy water. For stubborn residue, use a pH-neutral tile cleaner and a soft sponge. If the pattern is already worn, professional refinishing may be needed. Stop DIY attempts to repaint the stencil yourself.
- Symptom: Grease or food splatters on kitchen splashback: Likely cause: Cooking residue that has dried onto the tile. Corrective action: Apply a small amount of mild dish soap directly to a damp microfiber cloth and gently wipe the spot. Rinse with a clean damp cloth and dry immediately. For dried-on grease that won't budge, try a paste of baking soda and water applied with a soft cloth. Avoid scrubbing hard.
- Symptom: Water spots or soap scum on bathroom wall tiles: Likely cause: Hard water minerals and soap residue. Corrective action: Wipe tiles dry after each shower. For existing spots, use a 50/50 water and white vinegar solution on a soft cloth — but test on an inconspicuous area first, as vinegar can affect the stenciled finish over time. If vinegar dulls the finish, stop using it. Instead, use a dedicated pH-neutral tile cleaner designed for painted tiles.
- Symptom: Mold or mildew between tiles: Likely cause: Moisture buildup in grout lines. Corrective action: Clean grout with a soft toothbrush and a baking soda paste. Rinse thoroughly. Improve ventilation in the room to prevent recurrence. If mold returns despite cleaning, the grout may need sealing or replacement. This is a grout issue, not a tile issue.
Product details
- Arc Lichen: A bold tile which is individually hand stenciled to give a more organic texture. The hand-stenciled surface is more delicate than standard tiles, so you must use gentle cleaning methods to preserve the pattern.
Arc Lichen
